Reverb effect (pt5) – Other parameters for designing

Please take a moment to learn some of the last knowledge about the technical Reverb. Here are the other parameters that you need to know in the design studio. After this, you could have become a professional sound engineer.


Reverb creates an atmosphere environment. Therefore, the transformation of nature-related air pressure, humidity, temperature may alter slightly the frequency of natural Reverb. This phenomenon contributes to staining of the Reverb sound, making it as different from the original sound.


By using Modulation, you can adjust the frequency change (or height) Reverb via parameters such as vibration amplitude side elevation, speed change.

As a result, we have Reverb sound softer, more consistent, more natural way. Moreover, this increases the difference in the Reverb sound quality than the original sound source. So Reverb tail can easily hear more, well more without increasing the volume Reverb.

When using 1 bit (usually below 10%), the impact on the sound Modulation Reverb 1 naturally. Higher than 10%, it is converted into one type of role sounds interesting effects have applicability in many cases (especially when designing the spatial illusion in Sound Design).

Note the MIX: Use extreme caution with rustic instruments like Violin, Guitar, Piano for Modulation on Reverb can cause hearing instrument as being wrong line! With these recordings need maximum respect nature (eg classical music) of Reverb, Modulation 0-10% is about the value you should use.

Equalizer (EQ)

This is stuff I never forgot when using Reverb to remove those frequencies can cause muddy mixes, altering the tone of the original sound quality 1 negative way.


Most devices only Reverb provide basic EQ functions to filter away the bass (LowCut Filter) and highs (HiCut Filter). Equipment / senior Reverb plugin will “donate” your not one fully functional EQ as Waves IR1, WizooVerbW2 …

Once you insert the entire Drums Kit Reverb, bass blur created by Reverb Kick Drum. I used LowCut Filter to remove the low frequencies below 256 Hz in Reverb. Notice the change in the Kick Drum: Make better, feel Kick Drum near us than the entire Drums Kit. However, Drums Kit still has their own space.

Did you feel more confident when using Reverb yet?

It must be right? Understand what you are taking will help you control and control it as you want without having to rely solely on Preset – which never fit 100% with your mix with or to some!

End of Series Reverb Basically, if you just want to remember one thing. Then here’s my advice:

Remember the core role of Reverb in Mixing is connected sound sources (instruments, vocals …) and put them in a unified space! That will be the guideline for us in the mixing process.

Unlike Compression, Reverb is the sound effects are easy to recognize and is applied to 90% of the instruments in the mix. Therefore, it is more dangerous if misused. Do you have any advice for those new to how to use, tweak parameters Reverb

Related Posts

Leave a Reply

Your email address will not be published. Required fields are marked *